Builders Pinion Rack Hoist Man Material - MP-B19, B20 L

Product Detail

Builders Pinion Rack Hoist Man Material  - MP-B19, B20 L  




Overview 

Modularized and Standardized Production, Versatility of Components makes KANGBO builders hoist be efficient and low ownership cost for the users.

This rack and pinion builders elevator runs smoothly and stable with full load of 2.5 tons at speed of 0-80m/minute.   

Features

The drive devices and cars are generic and interchangeable. It means you can use 'A' hoist drive device on 'B' hoist car, or use left drive device on right car. Very convenient for the users, especially rental companies to handle and manage the equipments.  

Production Details 


Made strictly according to European standard.

Hot dip galvanised mast sections. Sand blasting and painted cage structure. Galvanised steel plates as cage wall, ground enclosure and doors. 

The edges of the car roof are totally welded. Users don't need to make waterproof layer on car roof by themselves, and never waterleakage.  

Advantage

Easy to install and maintain. 

Extremely long working life. 

Large capacity and High lifting speed with heavy duty.  

Technical Data  - Rack and Pinion Hoist  -  MP-B19, B20 L 

Payload	2,500 kg
Speed	0-80m/minute
Max. lifting height	450 m
Cage width (internal)	1.6 m
Cage length (internal)	4.0 m
Cage height (internal)	2.9 m
Cage doors	entrance/exit door & side door
Motor control	FC control
Engine power per cage	38×3 kw
Gearbox	KANGBO Helical reducer
Safety device type	centrifugal brake
Power supply range	380–500 V, 50 or 60 Hz, 3 phase
Type of mast	square column 650*650 mm with bolted rack
Length mast section	1.508 m
Rack module	8